• Brandon Webb posted an update 6 months, 3 weeks ago

    There are various categories of welding that can be used to participate materials together. We will be talking about the welding of metal to metal and steel to steel.

    The most frequent forms welding are:

    Wire feed welding – which a lot of people label mig, mag, gasless or flux cored.

    Arc welding – also known as stick welding

    Tig welding –

    Gas welding

    Spot welding

    Wire feed welding can be called MIG welding. The appropriate term is GMAW or Gas Metal Arc Welding. When working with this welding technique you own a torch or gun with your hand and squeeze a trigger. Whenever you squeeze the trigger, wire within the torch will begin to emerge. This wire will be pointed at what you want to weld.

    The technical good name for arc welding is SMAW or MMAW. This is Shielded or Manual Metal Arc Welding. On this occasion you employ an electrode that is merely a period of filler wire which is an average of about 1 foot long and it is covered inside a flux. When you make use of the rod inside the flux will melt away and make up a shielding gas that protects the weld.

    Tig welding is a very fine and delicate welding technique. With this you need to hold you torch in a hand and make use of a filler rod inside the other. The concept is you slowly feed the filler rod in to the weld along the way. You can weld with TIG or GTAW, Gas Tungsten Arc Welding without needing the filler rod and merely just melt the two bits of metal together. This is called "fusing", where while using the heat from arc you melt and fuse it together.

    As well as the last different form of welding you have is called "spot welding". This is useful for sheet metal fabrications. As a brief explanation the 2 bits of metal that need to be joined are put between your electrodes around the ends with the arms with the unit. They are offered together along with the welded part will probably be between those points. It is only often a second roughly to do this. Simply a buzz and it is done. This is the very quickly means of joining sheet metal parts. Things such as toolboxes are a good demonstration of so what can be and so are spot welded.

    There’s also all kinds of other a variety of welding processes for metal like friction, ultrasonic, thermite and sub arc in order to mention a few.

    But by far the methods stated earlier are the most frequent today.

    To get more information about Khuon han hoa nhiet please visit website:

    read here.